The previous Atmosphere X Series Cables started as an experiment to explore ways of improving UEF Shielding by placing UEF Tech at strategic grid points on the shields of Atmosphere cables, now called Matrix Shielding. Matrix Shielding arranges UEF elements on a grid pattern of the cable shield to lower its noise floor. Atmosphere SX refines Matrix Shielding further by using new Carbon Fibre UEF Tuning Discs developed expressly for Atmosphere SX to enhance the loom's ability to cancel noise that would otherwise cause high frequencies to sound harsh or fatiguing. As a result of our ongoing research into UEF Shielding, we have pushed the resolution envelope when voicing Atmosphere SX by developing new Carbon Fibre UEF Tuning Discs for a more holographic sound with enhanced resolution and musicality.
SRX Long Duration High Voltage Conditioning.
After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol.
UEF Cell
Filter your power.
Atmosphere Level 2 Power Cables contains a power supply that generates the 30 Volt DC bias necessary for Active Shielding, eliminating the need for messy external wiring and cumbersome wall warts. Performance is further enhanced by the introduction of UEF technology built into the power supply and cable shielding for an incredibly low noise floor.
Blue Devialet Spec Active SX Bullet
Redefining refinement.
We’ve designed a special, Devialet specific, Blue Active bullet voiced to match your Devialet components perfectly.
The Blue Active Circuits complete the Active circuit and must be in place in order to achieve the highest performance.
Atmosphere Devialet Spec SX Power Cable
Specification
3 each 12 awg. Copper Matrix Alloy:
- Dielectric: Modified PE
- Shielding: Braided Ground Plane Technology
- Geometry: 2 channel
1 each 5th Gen-Tricon:
- Silver Copper Matrix: Mono-crystal conductors with a separate ground conductor from shield
- Dielectric: PTFE
- Shielding: Ground Plane Technology
- Geometry: Tri-axial
- Listened for signal direction before build
1 each Silver Air String:
- Silver Air Strings: 99.9999% pure mono-crystal Silver conductor
- Dielectric: PTFE Air (sealed)
- Shielding: Ground Plane Technology
-
Hand crafted in our California factory
1 each Tungsten Air String:
- Tungsten Air Strings: 99.99% pure mono-crystal Tungsten conductor
- Dielectric: PTFE Air (sealed)
- Shielding: Ground Plane Technology
-
Hand crafted in our California factory
1 each Active Shielding UEF Cell:
- Swiss-made DC bias Power Supply
- UEF: Graphene treated pcb
- SR Quantum Capacitors
- Dielectric: PTFE
- Shielding: Ground Plane Technology
- Housing: Carbon Fiber Cylinder
1 each Devialet Blue Active Module:
- For lowest noise floor, completes Active bias circuit
Build Notes:
- 26 point-to-point hand soldered connections
- Atmosphere SX Level 3 UEF Matrix Treatment: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides.
- 1 Termination for Atmosphere Active Tuning Module (Red)
- Silver Solder: 4%
- Hand build time: 2.5 hours
- SRX Long Duration Quantum Tunneling: Before the Active power supply is incorporated all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that lets electrons to flow more freely. This allows the “Active Shielding” to work more efficiently yielding the maximum amount of low level information through the conductors and provides for the higher degree of realistic musical performance
- Secondary UEF Blue Treatment originally developed for SR Blue Fuses
- 5 day Burn-in: 2 step process
-
Hand crafted in our California factory
